Abstract
Diffusion bonding between the Cu-10%Fe and Al6061 alloys were successfully achieved at various temperatures (450-525°C) in the argon atmosphere. The bonding interface regions were analyzed using scanning electron microscopy and energy dispersive spectrometry and XRD. The presence of Fe particles in Cu was found to have an influence on the kinetics of intermetallic compound layer formation. Cu-Fe/Al 6061 exhibited the slower growth rate of intermetallic layers than Cu/Al 6061 after diffusion bonding. The movement of Cu-Fe/Cu9Al4 interface into Cu-Fe substrate appears to be hindered by the presence of populated Fe-containing particles and filaments. In addition to Cu9Al4, CuAl and CuAl2 intermetallic layers, Al7Cu2Fe and unreacted Fe were observed to be present in the intermetallic layers. The intermetallic layers which are close to Cu such as Cu9Al4 and CuAl were observed to be harder in Cu-10%Fe/Al 6061 than in Cu/Al 6061, suggesting Fe and its intermetallics have some strengthening effect on Cu9Al4 and CuAl.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call