Abstract
In this work, good bonding between the high-entropy alloy (HEA) CuCoCrFeNi and TC4 titanium alloy was obtained through vacuum diffusion welding at a joining temperature of 1000 °C for 60 min under a pressure of 5 MPa. The results showed that the typical interfacial microstructure of the CuCoCrFeNi/TC4 joint was TC4/diffusion layer/island structure/dendritic structure/diffusion layer/HEA. Compared with Ti atoms, atoms such as Cr and Co from the CuCoCrFeNi substrate were prone to diffuse into the other material. Intermetallic compounds Cu0.5Fe0.5Ti and Co0.15Ni0.85Ti, solid solutions Ti(Fe, Cr)ss and amorphous materials were produced in the joint. The self-diffusion activation energy formula [see formula in PDF] can be used to approximate the order of diffusion capacity of elements, which follows in Cr >Fe> Co > Ni.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
