Interfacial adhesion strength between FDM-printed PLA parts and surface-treated cellulosic-woven fabrics

Abstract

PurposeThe purpose of this study is to investigate surface treatments and fiber types on adhesion properties polylactic acid (PLA) three-dimensional (3D) parts printed on woven fabrics.Design/methodology/approachThe cotton, flax and jute fabrics were exposed to alkali, hydrogen peroxide, stearic acid and ionic liquid treatments to modify surface characteristics before PLA 3D printing. The modification efficiency was assessed with Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) analyses. Then, fused deposition modeling (FDM) printer and PLA filament were used for 3D printing onto the untreated and treated fabrics. The adhesion strength between the fabrics and PLA 3D parts were tested according to DIN 53530 via universal tensile tester.FindingsThe fabric structure is effective on adhesion force and greater values were observed for plain weave fabrics. Maximum separation forces were obtained for alkali pretreated fabrics among jute and cotton. Hydrogen peroxide treatment also increased adhesion forces for jute and cotton fabrics while decreasing for flax fabrics. Stearic acid and ionic liquid treatments reduced adhesion forces compared to untreated fabrics. Treatments are effective to alter adhesion via changing surface chemistry, surface morphology and fabric physical properties but display different effects related to fabric material.Originality/valueThis study provides experimental information about effects of different fiber types and surface treatments on adhesion strength of PLA 3D parts. There is limited research about comprehensive observation on 3D printing on cellulosic-woven fabrics.