Interface horizontal shear strength requirement in Ultra-thin whitetopping (UTW) pavement.

Abstract

Ultra-thin whitetopping (UTW) is a thin (5-10 cm) layer of concrete overlaying over an existing asphalt pavement. This concrete layer is bonded on the asphalt surface. Although UTW has been successful in strengthening asphalt pavement, in some cases, the composite pavement may debond at the interface under the concrete slab due to high shear stress. This paper aims to determine the interface shear strength required for UTW pavement systems using theoretical methods and calibrated numerical models (FEMs). The study analysed 432 pavement scenarios with different slab sizes, thicknesses, and material properties. The results show that higher shear stress occurs when the asphalt modulus is stiffer. The size of the slab, the modulus of the supporting layer, and the asphalt thickness have only a minor effect on the shear stress value. However, the thickness of the concrete slab significantly affects the maximum shear stress in the UTW, with an increase of up to 36.6% when reducing the slab thickness from 100mm to 50 mm. The FEM calculations can be used to determine the required interface horizontal shear strength for UTW.