Abstract
Multi digital output relative humidity and temperature sensors-SHT71 were set network monitoring points in the system, which can measure at any moment, timing, real-time temperature and relative humidity per point of the environment by-turn. Temperature-humidity value, dew-point value, date and time per point were displayed by lattice graphics LCM (Liquid Crystal Display Module) HY-12864K. At the same time, they were saved in nonvolatile FRAM (Ferroelectric Random Access Memory) FM31256, which can assure data do not lose after the power of the system fail. Acquired data can be uploaded directly to PC in the USB-HOST mode or be copied indirectly to PC far away from testing field by flash disk in the USB-DEVICE mode. The application software not only can draw temperature, humidity and dew-point curve and calculate maximum, minimum, average, but also can make further statistical analysis, report forms printing and set-up basic measure parameters of the system. DOI : http://dx.doi.org/10.11591/telkomnika.v12i5.5114
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TELKOMNIKA Indonesian Journal of Electrical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
