Intelligent Detection Method for Roll Stability of Unmanned Vehicle based on Fuzzy Control

Abstract

When the unmanned vehicle is disturbed by the outside world or carries out dangerous actions such as steering and continuous lane changing, the yaw stability of the unmanned vehicle decreases and the dangerous situation such as rollover is easy to occur. In this paper, the intelligent detection method for roll stability of unmanned vehicles based on fuzzy control is studied. The roll control system of the unmanned vehicle based on a double-layer control strategy is designed. The roll stability of the unmanned vehicle is controlled by an upper-layer fuzzy controller and lower-layer differential braking control. The dynamic model and tire model are built in MATLAB/Simulink to restore the running characteristics of unmanned vehicles. Based on the operation characteristics, the roll stability of the unmanned vehicle’s roll control system based on fuzzy control is tested from three aspects: steady-state response, roll stability and dynamic stability coefficient. The experimental results show that the transverse load’s transfer rate of the proposed method is reduced by more than 0.2% compared with the contrast method, the yaw angular velocity, centroid’s roll angle and roll angle measured under the two working conditions are closer to the actual values, which shows that the method has better control effect and detection accuracy.