Abstract
The energy efficiency of the battery charging system directly affects the distance which electric vehicles can get with per charge process. In addition, reducing current harmonics distortion (THD) increases the electrical quality and power conversion performance. This paper proposes intelligent control of high-efficiency two-stage battery charger topology for electric vehicles (EVs). In the first stage, for low harmonics of input current, high power factor and high efficiency, the average current mode controlled ac/dc boost power factor (pf) correction method constructed and analyzed with 98% efficiency and the power factor is achieved higher than 0.99. Additionally, in the second stage, for high energy efficiency, higher battery lifespan and allowing EVs to get more miles with per charge, a half-bridge LLC resonant converter controlled with a designed artificial neural network (ANN). Moreover, the LLC resonant converter controlled under dynamic load to analysis system from no-load to full-load. A 3.1 kW powered system has been designed for this study, the efficiency of the system has been calculated based on European efficiency standards and the peak efficiency of the whole system is 96.2%, the load voltage ripple is less than 0.5 V and also total harmonic distortion of the source current is less than 5%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.