Abstract
PurposeThe purpose of this paper is to develop an integrity monitoring method using ERAIM (Extended Receiver Autonomous Integrity Monitoring) for the integrated GNSS/Inertial (Global Navigation Satellite System and inertial navigation system) of general aviation aircraft.Design/methodology/approachFirst the tightly integrated GNSS with Strapdown Inertial Navigation System (GNSS/SINS) and the Kalman filter is designed. Then the processing of ERAIM is presented, in which the least‐squares theory is used to calculate the best estimators by integrating the predicted states with measurement states of Kalman filter. Based on the new measurement model, the integrity monitoring for GNSS/inertial system is carried out, including the fault detection, identification, reliability and separability. Lastly, the simulation and analysis for ERAIM vs RAIM are performed to validate the proposed method.FindingsSimulation results show that the ERAIM method is able to detect and identify effectively any type of failure including step failure and ramp failure. Compared to the RAIM method for only GNSS, the ERAIM increases the redundant information and reduces the correlation of test statistics, as well as enhancing the reliability and thus can significantly improve the performance of integrity monitoring.Practical implicationsIn safety critical sectors such as aviation, stringent integrity performance requirements must be met. The ERAIM method cannot only be used in integrity monitoring for the integrated GNSS/Inertial system, but also can be applied to only GNSS or other integrated navigation systems for general aviation aircraft.Originality/valueThe paper presents a new integrity monitoring method of ERAIM, which is able to improve the fault detection and identification capabilities significantly by extending GNSS‐used RAIM method into the GNSS/Inertial integrated system.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call