Abstract
Point of care testing (POCT) systems, are widely used to firstly, diagnose and secondly, monitor a number of illnesses and infectious diseases. This research aims to develop the integration between an optical fluorescence system and a microfluidic chip - through the use of advanced manufacturing techniques, such as anisotropic wet etching of Silicon (Si) wafers. The fabricated Si microfluidic chips may integrate into an existing POCT system and provide a potential avenue into multiplexed detection. Zemax and OptiCAD simulation packages were used to confirm the validity of the integrated microfluidic chip design. A testable microfluidic chip, using anisotropic wet etching of a Si wafer by Tetramethylammonium hydroxide (TMAH) etching solution, was fabricated. The process used a mask-less photoresist design, allowing for an easier and cost effective developmental stage in order to provide a proof of concept design. Currently, the TMAH etching process provides the required 370µm etch depth, to house a micro-capillary.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call