Abstract
Purpose This paper aims to develop a flexible manufacturing method for multimaterial sand molds to realize efficient additive manufacturing of multimaterial sand molds. Design/methodology/approach To study the influence of multimaterial sand laying process parameters on the quality of powder bed and optimize the design of multimaterial sand laying device. Numerical simulation and X-ray Computed Tomography are used to study the penetration behavior and curing morphology of resin in different sand particles. Findings The surface roughness and porosity of the multimaterial powder bed that meet the requirements of sand-based additive manufacturing can be obtained under the optimal printing process, that is, the sanding speed of 140.0 mm/s and sanding roller diameter of 15.0 mm. The resin penetration process of the multimaterial sand molds shows a pattern of transverse expansion and longitudinal penetration. In terms of the resin curing morphology, the maximum thickness of the resin film layer of zircon sand reaches 30.5 ± 1.0 µm, which has the best tensile property, followed by silica sand and the thinnest resin film layer of chromite sand. Originality/value In this work, a highly flexible integrated combined sand-laying device suitable for multimaterial sand-laying tests is developed, which can obtain a multimaterial powder bed that meets the needs of sand additive manufacturing. Subsequent casting print tests also verify that the program can meet the needs of multimaterial sand mold additive manufacturing.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call