Integral Transform Solution for Natural Convection Within Horizontal Concentric Annular Cavities

Abstract

Abstract Natural convection inside horizontal concentric annular cavities is dealt with through the generalized integral transform technique (GITT), offering a hybrid numerical-analytical solution of the continuity, Navier–Stokes, and energy equations in cylindrical coordinates. The flow is in steady-state, laminar regime, two-dimensional, buoyancy-induced, and the governing equations are written in the streamfunction-only formulation. Two strategies of integral transformation are adopted to verify the best computational performance, namely, the usual one with eigenvalue problems for both streamfunction and temperature defined in the radial variable, and a novel alternative with eigenvalue problems defined in the azimuthal angular coordinate. First, the eigenfunction expansions convergence behavior is analyzed to critically compare the two integral transform solution strategies. Then, test cases for different aspect ratios and Rayleigh numbers are validated with experimental data from the classical work of Kuehn and Goldstein. A maximum relative deviation of 5% is found comparing the GITT results for the average Nusselt number against the experimental data, while an 8% maximum relative deviation is found comparing against an empirical correlation by the same authors. It is concluded that the GITT solution with the eigenvalue problem in the angular coordinate yields better convergence rates than the more usual eigenfunction expansion in the radial variable. This is due to the originally homogeneous boundary conditions in the angular direction, which do not require filtering for convergence enhancement, as opposed to the required filter in the radial direction that introduces a source term in the filtered equation for the streamfunction.