Insight into the tribological properties of cylinder liner-piston ring under the nano BNNs/Cu composite additive lubrication

Abstract

To improve the tribological properties of the cylinder liner-piston ring, a two-dimensional hexagonal boron nitride/copper composite lubricant additive was prepared and characterized in detail. The tribological properties and lubrication mechanism of nano hexagonal boron nitride composites with different concentrations were studied through the reciprocating friction test on the Rtec friction and wear tester. The results show that copper is successfully reduced and attached to the surface of h-BN nanosheets through the self-polymerization of dopamine, and the spherical structure promotes the interlayer slip of the nanosheets during the reciprocating friction process. The appropriate concentration of nano composite additives has excellent anti-friction and anti-wear properties. At 1 Hz and 100 N, the friction coefficient and wear quality of the nano composite additive with a concentration of 2 wt% were reduced by 29.07% and 76%, respectively. The surface Sq value and Sz value of the cylinder liner sample decreased by 68.06% and 74.47%. At the same time, under the condition of high speed and heavy load, the average wear depth of the cylinder liner sample is reduced by 61.3%. The nano composite material additive forms an excellent friction protective film on the wear surface of the cylinder liner, which can better enter the wear surface of the cylinder liner and produce a filling and repairing effect. The research results provide a method for the use of nano hexagonal boron nitride composite additives to inhibit the wear of cylinder liner-piston ring of Marine diesel engines.