InP/InAsP Nanowire-Based Spatially Separate Absorption and Multiplication Avalanche Photodetectors

Abstract

Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication region is implemented in a large bandgap material is desired to avoid detrimental Zener tunneling leakage currents, a concern otherwise in smaller bandgap materials required for absorption at 1.3/1.55 um. Self-assembled III-V semiconductor nanowires offer key advantages such as enhanced absorption due to optical resonance effects, strain-relaxed heterostructures and compatibility with main-stream silicon technology. Here, we present electrical and optical characteristics of single InP and InP/InAsP nanowire APD structures. Temperature-dependent breakdown characteristics of p+-n-n+ InP nanowire devices were investigated first. A clear trap-induced shift in breakdown voltage was inferred from I-V measurements. An improved contact formation to the p+-InP segment was observed upon annealing, and its effect on breakdown characteristics was investigated. The bandgap in the absorption region was subsequently varied from pure InP to InAsP to realize spatially separate absorption and multiplication APDs in heterostructure nanowires. In contrast to the homojunction APDs, no trap-induced shifts were observed for the heterostructure APDs. A gain of 12 was demonstrated for selective optical excitation of the InAsP segment. Additional electron beam-induced current measurements were carried out to investigate the effect of local excitation along the nanowire on the I-V characteristics. Our results provide important insight for optimization of avalanche photodetector devices based on III-V nanowires.