Abstract
We report on solution processed polymer light emitting diodes (PLEDs) using inkjet-printed embedded and non-embedded metal grid anodes. Metal grids were inkjet-printed in a honeycomb layout. Honeycomb dimensions were varied from 3 mm to 8 mm to optimize device performance. Inkjet-printed grids were then coated with a highly conductive PEDOT:PSS formulation. First experiments on PEDOT:PSS coated, non-embedded metal grid anodes showed that grids with a 3 mm honeycomb diameter have a similar efficiency as optimized indium tin oxide (ITO) based reference devices. To further improve the efficiency of the devices, the honeycomb Ag-grids were embedded in an Ormocer®-based material. A detailed performance analysis of PLEDs fabricated on ITO, non-embedded and embedded grids was carried out. It is shown that reduced leakage current and enhanced light outcoupling by embedding result in a significant efficiency enhancement of 250% in inkjet-printed embedded Ag-PEDOT:PSS ITO-free PLEDs, compared to the ITO-based reference PLEDs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
