Abstract
The paper deals with the designing of the initial arrangement for dual-band antennas comprising two parallel dipole-like radiators as the drivers for the mentioned antenna. The excitation of the drivers is provided by the source of the induced electromotive forces (EMF), whose outputs are attached to the remote terminals of the radiators. The paper also provides the key electrodynamic characteristics of the structure under research for the following procedure of multi-parametric nonlinear optimization. In addition, on the basis of the induced EMF method, has been obtained the expressions for the far-field zone (Fraunhofer zone) characteristics with taking into account the parasitic currents on the radiating bodies of the dipole, which allows more accurate design of the initial topology of the antenna.
Highlights
Введение Анализ работ, посвященных проектированию двухдиапазонных антенн и их компонент [1,2,3,4,5,6], показывает, что абсолютное большинство разработанных и изготовленных на сегодняшний день излучателей данного типа представляют собой композицию блока делителя мощности и непосредственно излучающего элемента
The paper deals with the designing of the initial arrangement for dual-band antennas comprising two parallel dipole-like radiators as the drivers for the mentioned antenna
The excitation of the drivers is provided by the source of the induced electromotive forces (EMF), whose outputs are attached to the remote terminals of the radiators
Summary
А. Формирование стартового облика двухдиапазонной антенны на основе излучателей дипольного вида с концевым возбуждением для цифровых антенных решеток // Вопросы радиоэлектроники. ФОРМИРОВАНИЕ СТАРТОВОГО ОБЛИКА ДВУХДИАПАЗОННОЙ АНТЕННЫ НА ОСНОВЕ ИЗЛУЧАТЕЛЕЙ ДИПОЛЬНОГО ВИДА С КОНЦЕВЫМ ВОЗБУЖДЕНИЕМ ДЛЯ ЦИФРОВЫХ АНТЕННЫХ РЕШЕТОК*. В работе описан один из возможных вариантов формирования стартового (эскизного) облика двухдиапазонной антенны на основе схемы из двух параллельно расположенных излучателей дипольного вида, представляющих собой возбудитель электромагнитных волн для такой антенны. Процесс формирования стартового облика в этом случае понимается как построение эскиза (проводящего рисунка) антенны с проработкой механизма возбуждения электромагнитных волн и расчетом соответствующих размеров элементов с целью получения требуемых характеристик излучения. Если согласование будет достигаться только для обозначенных частот, причем кривая согласования при этом должна иметь ровно два минимума на интересующих нас частотах. 1. Формирование стартового облика антенны будет включать результаты решения внутренней и внешней задач системы
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.