Infrared Imaging Analysis of Green Composite Materials during Inline Quasi-Static Flexural Test: Monitoring by Passive and Active Approaches.

Abstract

Composite materials have been used for many years in a wide variety of sectors starting from aerospace and nautical up to more commonly used uses such as bicycles, glasses, and so on. The characteristics that have made these materials popular are mainly their low weight, resistance to fatigue, and corrosion. In contrast to the advantages, however, it should be noted that the manufacturing processes of composite materials are not eco-friendly, and their disposal is rather difficult. For these reasons, in recent decades, the use of natural fibers has gained increasing attention, allowing the development of new materials sharing the same advantages with conventional composite systems while respecting the environment. In this work, the behavior of totally eco-friendly composite materials during flexural tests has been studied through infrared (IR) analysis. IR imaging is a well-known non-contact technique and represents a reliable means of providing low-cost in situ analysis. According to this method, the surface of the sample under investigation is monitored, under natural conditions or after heating, by recording thermal images with an appropriate IR camera. Here, the results achieved for jute- and basalt-based eco-friendly composites through the use of both passive and active IR imaging approaches are reported and discussed, showing the possibilities of use also in an industrial environment.