Abstract

AbstractIn this study, apple slices were dried using infrared (IR) and hot air techniques and comprehensively analyzed in terms of drying and product characteristics. The influence of IR power level (450–650 W) and hot air temperature (60–75°C) on mass transfer, color kinetics, product texture, microstructure, and rehydration characteristics was studied. The results indicated that drying time, color change, and energy requirement were lower in IR drying than in hot air drying. Moisture diffusivity was observed to increase with IR power (3.367 × 10−9–5.579 × 10−9 m2/s) and hot air temperature (1.288 × 10−9–2.387 × 10−9 m2/s). The activation energies of apple slices in IR and hot air drying were 11.94 and 21.90 kJ/mol, respectively. IR‐dried apple slices were more crispy, with a porous structure and higher rehydration ability. Experimental data were fitted to nine different thin‐layer drying and four‐color kinetic models using nonlinear regression analysis. The results of regression analysis indicated that the Midilli–Kucuk model is the best model to describe the drying behavior in both techniques. The color characteristics (L, a, and b) can be best explained by the modified color model and total color change by fraction conversion model for both IR and hot air drying of apple slices. This study revealed that IR drying of apple slices results in a better quality product in less time and energy as compared to hot air drying.Practical applicationsDrying is a vital food processing and preservation technique based on the principle of reducing the water content of the product. Although several drying techniques are available, there have been continuous efforts to improve drying methods in terms of energy efficiency and product quality attributes. The present work has been carried out considering the dearth of information on the influence of infrared power/intensity on the drying behavior and product quality of apple slices. Mass and color kinetics have been studied for a better understanding of the process, along with texture, microstructure, and rehydration properties. Our results showed that the process is superior, in terms of energy and product quality, as compared to other published work. It is concluded that infrared drying can be effectively used in the dehydration of apple slices on an industrial scale and can be promoted as a healthy alternative to fried snacks.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call