Abstract
The influences of 2.5wt% Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy (SMA) were studied by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimeter (DSC). The experimental results show that Mn addition influences considerably the austenite-martensite transformation temperatures and the kind of martensite in the Cu-Al-Ni alloy. The martensitic transformation changes from a mixed xed β1→β′1+γ′1 transformation to a single β1→β′1 martensite transformation together with a decrease in transformation temperatures. In addition, the observations reveal that the grain size of the Cu-Al-Ni alloy can be controlled with the addition of 2.5wt% Mn and thus its mechanical properties can be enhanced. The Cu-Al-Ni-Mn alloy exhibits better mechanical properties with the high ultimate compression strength and ductility of 952 MPa and 15%, respectively. These improvements are attributed to a decrease in grain size. However, the hardness decreases from Hv 230 to Hv 140 with the Mn addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Minerals, Metallurgy, and Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.