Influence on Tribological Behavior of PEEK Composite Film Layer on PEEK-PTFE Bearings with Artificial Defect in Dry Condition

Abstract

In order to explore influence on tribological behavior of PEEK composite film layer in PEEK-PTFE composite radial alumina ball bearings, rolling contact fatigue tests were performed by using the PEEK bearing’s inner rings with the artificial defects in dry condition. When rotation speed and applied load were 600 rpm and 98 N, the number of cycles of the PEEK-PTFE bearings reached 1.0×107 fatigue cycles. The artificial defects with 0.02 mm depth on the raceway surface of the PEEK inner ring was covered with PEEK composite film accumulation.