Abstract
The paper deals with analyzing currently used dehydration methods and techniques, their weaknesses, which, in particular, relate to their application in both the laboratory conditions and industry are evaluated. The emphasis is placed on the problems, caused by the residual water in hydrophilic organic liquids (such as alcohols or aldehydes, ketones or carboxylic acids), and disadvantages of known dehydration methods are assessed. Using solid-phase adsorbents for dehydrating organic liquids, capable of forming crystalline hydrates is proposed and some attention is paid to another type of interaction between solid-phase adsorbent and water - its hydrolysis. It is proposed to use acid salts, which are much less susceptible to hydrolysis than neutral salts due to the presence of hydrogen ions. Calculation of tribasic orthophosphate acid salt hydrolysis constants is given as an example. Since salt hydrolysis may lead to undesirable consequences, in particular, organic liquids contamination by its products (e.g., alkalies or acids), the possibility of selecting such salts, which would be practically unsusceptible to hydrolysis is estimated. In particular, salts of s1-elements, which are insoluble in organic low-polar liquids, and at the same time effectively formed crystalline hydrates when interacting with water, adsorbing a large amount of water moles were used. Using such salts in the industry would help to eliminate the need for applying distillation columns or vacuum, or azeotropic distillation with the component, shifting an azeotropic point.
Highlights
ВведениеОбезвоживание слабополярных органических жид костей, в частности, спиртов, перед их последующим применением, например, для получения диэтилового эфира, этилацетата, биотоплива, является весьма ак туальной задачей.
Во всех перечисленных выше случаях вода явля ется нежелательным побочным компонентом слабопо лярных органических жидкостей.
Хотя и существует определенная часть органических жидкостей, относя щихся к гидроф обным (например, хлороформ, бензол), наличие в которых остаточной воды, как правило, не является серьезной проблемой из-за отсутствия взаим ной растворимости, однако, например, спирты, относят к гидрофильным жидкостям, и поэтому присутствие в них воды является в ряде случаев серьезным пре пятствием для дальнейшего их использования, поэтому неотвратимо встает вопрос их обезвоживания [1, 2]
Summary
Одним из основных потребителей графитированных электродов является электросталеплавильное производство. Сырьем для производства электродов служит каменноугольный пек. Повышение требований к качеству графитированных электродов для мощных сталеплавильных печей и эксплуатации их при больших токовых нагрузках влечет за собой и более высокие требования к качеству каменноугольного пека [1]. Актуальность работы связана с тем, что каменноугольный пек является единственным видом связующего компонента для производства анодной массы, графитированных электродов, конструкционных и других материалов
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have