Influence of zirconium and copper sub-layer in cell integrations on femtosecond laser-processed Ti thin films

Abstract

The creation of novel biocompatible Ti-based thin films with a Zr or Cu sub-layer modified by ultrafast laser processing is studied. To prepare bioactive surfaces, ultrafast laser processing is focused on the formation of laser-induced periodic surface structures (LIPSS) with the production of oxide phases at the surfaces. Two differently designed multilayer thin films Ti/Cu/Ti and Ti/Zr/Ti were deposited on the silicon using the ion sputtering method. The Ti thin film contains Cu or Zr sub-layer (thickness of 10 nm) at the 10 nm below the surface. The composition and surface morphology variations for these systems, deposited and laser-processed under the same experimental conditions, were caused only by different thermo-physical properties of the sub-layer (Cu or Zr). The surface morphology in the form of LIPSS, led to improved cell adhesion and stable cells/thin films interface compared to as-deposited samples. Field-emission scanning electron microscopy and MTT analysis revealed that laser processing of both systems increased cell adhesion, proliferation, and metabolical activity of L929 mouse fibroblast cells compared to non-modified flat surfaces. Overall, the biocompatibility of Zr-containing thin films is better than Ti/Cu/Ti system. Further, laser processing and formation of LIPSS makes Ti/Zr/Ti thin films excellent candidate for biomedical .