Influence of tillage methods on the water-physical conditions of chernozem typical and winter wheat yield

Abstract

The article presents the results of three-year studies to determine the effectiveness of local chisel, ultra-deep chisel, chisel conventional and disk tillage when growing winter wheat after fallow in the conditions of the Left-Bank Forest-Steppe of Ukraine. It has been established that changing the plowing of local or disking soil tillage leads to an increase in the density and hardness of the arable layer. Solid chisel tillage ensures the agrophysical state of the soil at the level of plowing. Chisel loosening improves the structure of the arable layer due to an increase in the number of water resistance aggregates by 2.5–3.4 % in comparison with plowing. The methods of soil tillage in fallow have little effect on the change in the moisture content of the arable and meter layers, which is facilitated by the accumulation and retention of moisture during the maintenance of fallow. Chisel tillage contributes to an increase in soil protection efficiency of the surface by 5–7 % in comparison with plowing due to the partial preservation of crop residues in the period after harvesting the predecessor to the beginning of summer, improvement of the structure of the upper layer and differentiated redistribution of the root system. The highest level of soil protection efficiency is provided by local chisel loosening. All non-moldboard tillage in fallow contributed to an increase in the yield of wheat grain in comparison with plowing, especially after solid loosening with a chisel plow at 33-35 cm, where an increase in yield was recorded by 0.36 t/ha (9 %). An increase in the level of profitability by 16–25 % makes it possible to recommend chisel local and solid loosening by 33–35 cm in a fallow when growing winter wheat in the conditions of the Left-Bank Forest-Steppe of Ukraine. Keywords: winter wheat, chisel loosening, local loosening, efficiency, density, hardness, water resistance, yield.