Abstract

During the long-term CO2 storage process, the CO2–brine–rock interaction (CBRI) may change the elastic-plastic behaviors of sandstone reservoirs, potentially leading to rock damage and CO2 leakage. A good understanding of the influence of the CBRI on the plastic zone of sandstone is crucial for evaluating the rock fracturing processes. In this paper, three-point bending tests were conducted under both monotonic and cyclic loading conditions, and the digital image correlation technique was used to analyze the elastic and plastic characteristics of the samples. The experimental results showed that the CBRI decreases the yield strength and corresponding crack mouth opening displacement by 25 % and 65%, respectively, thus increasing the probability of fracturing. Additionally, it was found that the CBRI enlarges the plastic zone by about 20 %. The size of the theoretical plastic zone in the sandstone sample for different loads was determined, and the ratio of the plastic zone size in the samples with CO2–brine saturation to that without CO2–brine saturation was found to be about 1.18. Finally, the mesoscale factors affecting the plastic zone size after CO2–brine saturation were analyzed. This study helps to understand the effect of the elastic-plastic behavior of sandstone on reservoir stability during long-term CO2 storage.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.