Abstract
Geomechanical behavior of methane hydrate-bearing sediment (MHBS) plays a major role in evaluation of the stability of a hydrate reservoir. A series of triaxial compression tests were conducted on MHBS to study the influence of temperature and pore pressure conditions on its mechanical behaviors. The experimental results show that temperature and pore pressure have a significant effect on the stress–strain curve, stiffness, and strength of MHBS. As temperature decreases and/or pore pressure increases, the stress–strain curve manifests an enhanced strain-softening characteristic, stiffness, and strength. Furthermore, MHBS cohesion also tends to exhibit a significant increase, but its internal friction angle almost remains constant with decreasing temperature and/or increasing pore pressure. These findings imply that the change in temperature and pore pressure affects the strength of MHBS, which occurs predominately due to change in its cohesiveness. To describe these impacts, a phase state parameter is introduced to characterize the temperature and pore pressure conditions. Meanwhile, three empirical formulas for relating the secant modulus, strength and cohesiveness to phase state parameter are presented. Good agreement between simulation and measured data indicates that the phase state parameter can effectively describe temperature and pore pressure conditions. The proposed empirical formulas are able to address the influences of temperature and pore pressure conditions on geomechanical characteristics of MHBS.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call