Abstract
Indium tin oxide (ITO) films had been deposited on glass substrate without substrate heating and then tungsten oxide (WO3) films were deposited on ITO films by DC magnetron sputtering. In this work, we present the annealing ambient effect of ITO substrate on electrochromic properties of WO3 films. The ITO films were annealing in air and in vacuum at 350°C before coating with WO3 films. The structural, optical, and electrical properties of ITO films for as-deposited, annealing in air and in vacuum were investigated by X-ray diffraction, UV-VIS-NIR spectroscope and four point probe. The ITO films had a better crystallinity and lager grain size after annealing in air and in vacuum. The resistivity of ITO films increase with annealing in air, but decrease with annealing in vacuum. The WO3 films show difference surface morphology with higher grain size and surface roughness when coating on annealed ITO films in both cases. The electrochemical properties of film systems were characterized by cyclic voltammetry. The film systems of ITO plus WO3 showed that the charge capacity of ITO substrate annealing in vacuum was higher than the as-deposited ITO substrate and the ITO substrate annealing in air, respectively. This result corresponded to electrical conductivity of each ITO substrate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
