Abstract
AbstractAmorphous irondisilicide thin films were deposited on silicon substrates in a RF sputtering process, followed by rapid thermal crystallization by means of moving the thin film beneath a line-shaped electron beam to form β-FeSi2. Depending on the deposition process parameters, films of a different stoichiometry can be produced. The deviations from the 1:2 stoichiometry, which have been determined by Rutherford Backscattering (RBS), are related to changes in the microstructure (studied by microscopic methods like TEM and AFM), the infrared phonon spectra (measured by FTIR spectroscopy) and the electrical properties of the crystallized films. The microstructure of the iron disilicide thin films is improved when the composition significantly deviates from 2.0, probably due to silicon interstitials in the silicide thin film. Films of different stoichiometry result in p- or n-type thin films with carrier densities below 5×1018cm−3 and hall mobilities up to 180cm 2/Vs. First results show that not only β-FeSi2-siliconheterojunctions as reported before but also pn-β-FeSi2-homojunctions show rectifying behavior. Rapid thermal processing with the line electron beam leads to a further improvement of the film quality when the scan velocity is increased up to the order of several cm/s.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
