Abstract
Heat treatment is widely used to accelerate the strength-gaining rate of concrete. In general, the ultimate strengths of the heated-treated concrete are lower than those of the standard cured specimens. When ultrafine fly ash (UFA) is included in concrete, the pozzolanic reaction is accelerated through the heat treatment. Sometimes, various chemical activators were used to activate the reactivity of fly ash. In the current study, UFA and slag were used as a replacement for cement, steam curing and chemical activators were used to accelerate hydration of cement and fly ash, and then compared with moist curing. This paper presents the influence of steam curing on the compressive strength of concrete containing UFA with or without slag. The experimental results indicated that the concrete containing UFA has low early strength after 13-h steam curing and that the difference between the 28-day compressive strength of concrete through 13-h steam curing and that of moist-cured concrete is large, but the concrete with UFA and CaSO 4 or Ca(OH) 2 has a high early strength, thus, the reactivity of fly ash must be accelerated. Concrete containing UFA and ground slag was prepared, whose compressive strengths were improved.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call