Abstract
Mg–5Li–3Al–2Zn– xSn ( x = 0.5, 1.0, 1.5, 2.0) alloys were designed and prepared using vacuum melting furnace. The microstructure and mechanical properties were tested after extrusion to reveal the effects of Sn on the alloys. The results show that, the deformed alloy is composed of α phase and Mg 2Sn. With the addition of Sn, the grain size of deformed alloy is refined. When the content of Sn is 1.0%, the grain size of alloy is the finest. The addition of Sn also improves the strength of the alloys due to the formation of Mg 2Sn phase and refining effect. When the content of Sn is 1.0%, the strength is the highest (306.95 MPa).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.