Abstract

The impact of the sintering temperature on the phase composition and electrical properties of 5%SrTiO3–95%BaZr0.15Ti0.85O3 (ST-BZT) ceramics fabricated by solid-state method and consolidated by two-step sintering is presented. A systematic analysis of the phase composition, microstructures, dielectric, ferroelectric, and energy storage characteristics. A di-phase SrTiO3–BaZrTiO3 composite is obtained at low sintering temperatures below 1400 °C. Increasing the sintering temperature causes a shift of the Curie temperature from 62 °C to 55 °C together with changes of permittivity values and of the ferroelectric loops, thus indicating a progressive interdiffusion process at the interfaces, together with a better densification. Remarkably, the ST-BZT composition sintered at 1500 °C exhibits characteristics of a single phase (Ba,Sr) (Zr,Ti)O3 solid solution, with high room temperature permittivity around 2950 and good ferroelectric response (saturation polarization Pmax = 12.6 μC/cm2 and remnant polarization Pr = 2.16 μC/cm2). Consequently, this composition displays a much greater recoverable energy density (Wrec = 54.5 mJ/cm3) in comparison to the ones of the di-phase ST-BZT composites and the parent phases. However, the (Sr0.05Ba0.95) (Zr0.14Ti0.86)O3 solid solution, demonstrates a lower energy efficiency (72%) in comparison to the ST-BZT di-phase composites sintered at lower temperatures, which exhibit higher energy efficiency values around 86%. In addition, the charge-discharge experiments were performed under different electric fields to disclose the difference in energy storage properties in 5%SrTiO3–95%BaZr0.15Ti0.85O3 ceramics. This suggests that the sintering strategy plays a crucial role in determining the energy efficiency of the obtained ceramics. Additionally, all the investigated ST-BZT ceramics present high energy efficiency at low-applied electric fields, suggesting their potential as candidates for energy storage capacitors operating at moderate fields.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call