Abstract
ABSTRACT The objective of this study was to examine the effectiveness of using shotblasting treatment to improve surface friction of asphalt pavements. This study selected six pavement sections with low skid resistance from the National Center for Asphalt Technology Test Track for shotblasting abrasion. These sections included three surface mixture types (open-graded friction course and dense-graded asphalt with and without reclaimed asphalt pavement material) and four coarse aggregate types (limestone, granite, dolomite and sandstone). The dynamic friction tester and lock-wheel skid trailer were used to measure the surface friction of these sections at the different traffic polishing cycles. In addition, the pavement performance including rut depth, cracking and surface roughness were periodically monitored. The test results indicated that shotblasting treatment was effective in improving the friction performance of asphalt pavements and had no detrimental impact on pavement performance in terms of cracking, rutting and surface roughness. The friction improvement by shotblasting treatment was significantly dependent on surface mixture type and coarse aggregate type.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
