Abstract
Aluminum alloys are widely used in aircraft structural components where light weight, high strength and good corrosion resistance are the primary requirements. These alloys are generally used in peak-aged (T6) condition in which they are susceptible for stress corrosion cracking. In the recent years, retrogression and re-ageing (RRA) treatment on aluminum alloy is carried out to enhance their corrosion resistance maintaining the ultimate tensile strength. The aim of this work was to study the influence of RRA treatment on the fatigue crack growth rate (FCGR) behavior. The 7010 aluminum alloy was heat treated to two different conditions i.e., T6 and RRA. The microstructures of these alloys were characterized by using TEM. Standard compact tension (CT) specimens were prepared and FCGR tests were carried out by using a 100 kN servo-hydraulic test machine as per ASTM E647-15e1. The constant amplitude FCGR tests were carried out at a stress ratio, R = 0.5 using sine wave loading pattern at 10 Hz. Crack length was monitored by following compliance technique. Microstructural studies show that RRA treated alloy contain fine and densely populated precipitates in the matrix along with coarse and discontinuous precipitates in the grain boundary. The fatigue crack growth rate was observed to reduce along with an increase in the threshold stress intensity factor range (ΔKth) for RRA treated alloy compared to the T6 alloy. The mechanisms for reduction in fatigue crack growth rate of RRA treated alloy is attributed to the microstructural modifications. The increased resistance is expected to enhance the damage tolerance capability of the alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.