Abstract
AbstractSmart composites embedded with Fiber Bragg Grating (FBG) sensors are getting increasingly popular in aircraft structures due to their self‐sensing and monitoring capability. However, a resin pocket around the FBG sensor would be formed in the manufacturing process, which strongly impacts the mechanical properties of the composite host. Therefore, the influence of primary processing parameters (FBG orientation angle, preforming temperature, and preforming pressure) on the formation of resin pockets was investigated in this work. It is found that there is a sinusoidal relation between the resin pocket geometry and the FBG orientation angle. A negative linear relation is noted between the resin pocket geometry and the preforming temperature and pressure. A prediction model based on the backpropagation neural network (BPNN) was established, which was able to quickly and accurately predict resin pocket geometry subjected to given processing parameters. This work provides useful guidance for the processing control of smart composites embedded with FBG sensors.Highlights Resin pocket geometry was formed primarily in the preforming stage. Effect of processing parameters on resin pocket geometry was characterized. A BPNN model was established for the fast prediction of resin pocket geometry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.