Abstract
Agglomeration by high-shear mixing of linear alkylbenzene sulphonate (LAS) paste and zeolite powder is investigated in terms of the initial temperature of the paste (and hence its apparent viscosity), impeller speed and volume ratio of paste to powder. Variations in these parameters chiefly affect the rate of development of the different regimes in the agglomeration process. The regimes are quantitatively described by the bulk granular aerated and tapped densities, which are determined using an automated tapping technique. The bulk tapping data are analysed using the Kawakita equation and a logarithmic compaction approach. A number of bulk compaction parameters (including the Hausner ratio) are obtained, and their variation with mixing time is discussed. Comparison of the tapping parameters, along with optical micrographs and granule size distribution data, confirmed that similar agglomeration mechanisms are occurring for each system studied. The agglomeration process features two main mechanisms, namely binder distribution followed by granule consolidation and coalescence. The results indicate that it is possible to assign scaling factors to predict the mixing time required to obtain a designated regime. The scaling factors employed for the variation in paste apparent viscosity, impeller speed and paste amount are explained physically in terms of power law functions, Froude numbers and adsorption/ viscous energy dissipation mechanisms respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.