Abstract
The life of the components used under slurry abrasion conditions is governed by the process variables, properties of the abrasive materials in the slurry and the material properties. Slurry wear, abrasion occurs in Extruders, pumps and pipe transport slurry of minerals and ores in mineral processing industries. In the present research, the effect of operating variables such as abrasive particle size and shape, slurry concentration and normal load on the abrasive slurry wear behavior of the weld deposit martensitic steel surface produced by the Manual Metal Arc Welding Hard facing process was conceded out. The testing was conceded out using the slurry abrasion test rig. The silica sand particles were used as the abrasive medium. The qualitative nature of wear pattern and morphology of the worn out surface was examined under scanning electron microscope (SEM). These features were correlated with operating parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have