Abstract
Ni-based composite ceramic coatings with good comprehensive performance are obtained by a supersonic plasma spraying process. A ceramic powder is added to a Ni60/WC powder to make the surface of the sprayed sample more uniform and compact. Pores are present on the surface of the two composite ceramic coatings prepared by NiWT(Ni60/WC + TiO2) and NiWA(Ni60/WC + Al2O3), as well as five phase components. In the microscopic morphology of the two composite ceramic coatings, the surface composition of the NiWT coating is relatively uniform and the surface of NiWA exhibits a cluster structure with more pits than NiWT. The friction coefficient of the NiWT coating at 200 r min−1 is between 0.40 and 0.43 and that of the NiWA coating is between 0.35 and 0.38. Simultaneously, the abrasion width and wear volume of the NiWT and NiWA coatings are small compared with the substrate, while the abrasion width and volume of the NiWT coating are smaller. The composite ceramic coatings prepared by the addition of two kinds of oxidized ceramics, through comparative analysis of the experiment, showed that NiWT had an improved surface micro-morphology and wear resistance than NiWA. The wear morphology of NiWT showed a wear mechanism of abrasive particles and the wear morphology of NiWA showed a fatigue wear mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.