Abstract
In order to overcome the problem of long-term stability of perovskite solar cells, the author proposes a method to study the effects of nanosemiconductor materials on the thermal stability of solar cells. In this method, n = 3 and n = 1 (C6H5(CH2)2NH3)2(CH3NH3)n-1Pbn I3n+1 two-dimensional nanoperovskite films were investigated on glass substrates and indium tin oxide (ITO) substrates, respectively, on the thermal stability. Experimental results show that the glass-based nanoperovskite PMPI3 film was partially decomposed into PbI2 after being heated at 160°C. When the temperature reaches 180°C, the film is completely decomposed into PbI2, and the perovskite PMPI3 film with ITO as the substrate is completely decomposed into PbI2 when the heating temperature reaches 140°C. The charge transfer between the perovskite film and the substrate is the physical reason for its easier thermal decomposition on the ITO substrate. Suggestions for improving the thermal stability of perovskite solar cell devices are given from the aspects of device design and fabrication process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.