Abstract
Flammability studies of electrolytes are required for screening safer materials used in lithium-ion batteries. Besides the thermal stability, the effects of lithium salts on electrolyte combustion are important as well for fire safety of electrolytes. To clarify the influence of lithium salts on the electrolyte flammability, experimental analyses were conducted using a unique wick combustion system in conjunction with the limiting oxygen concentration (LOC) test, called wick-LOC method. The dimethyl carbonate (DMC)-based electrolytes with 1M addition of different lithium salts (LiPF6, LiBF4, and LiTFSI) were studied comparing with pure DMC and trimethyl phosphate (TMP)-added solvents. The three lithium salts gave unique and distinct flame behaviors including flame shapes, colors and the changes of wick surface until self-extinguishing. The wick-LOC results indicated a considerable flame-retardant effect of LiPF6, while other salts have minor effects on the flame extinction. Utilizing the flame spectrum and combustion residue analyses, the roles of salts during combustion were characterized. The PF6 anion played a similar role with the TMP additive in the gas phase flame inhibition. In the cases of LiPF6 and LiBF4, the solid products (LiF) accumulation blocked the fuel supply from the wick to the flame region. In the case of LiTFSI, the serious charring of the cotton wick was considered as a potential hazard on solid combustibles in the real fire scenarios.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.