Influence of knee flexion on early femoral fracture healing: A combined analysis of musculoskeletal dynamics and finite elements

Abstract

Background and ObjectivesKnee flexion causes a certain amount of misalignment and relative movement of the fractured ends of the femur fracture, and if the flexion angle is too large it will affect the stability of the fracture and the healing process, making it challenging to design a safe range of flexion. However, due to a lack of basic understanding of the effect of knee flexion on the mechanical environment at the fracture site, clinicians are often unable to provide an objective and safe range of motion in flexion based on subjective experience. The aim of this study was to evaluate the effect of knee flexion on plate and fracture healing using finite element analysis (FEA). MethodsA human musculoskeletal model was constructed based on CT scan data, and the mechanical properties of the fracture site were changed by adjusting the knee flexion angle. The joint forces, muscle forces and moments acting on the femur were obtained by inverse dynamics analysis, and the biomechanical properties of the fracture-plate system were analyzed using finite elements. A finite element model of the fracture-plate system without muscle loading was also constructed. The effect of knee flexion on the safety of plate fixation and fracture healing was evaluated in terms of the biomechanical properties of the plate and the interfragmentary motion of the fracture. ResultsAs the knee flexion angle increases, the von Mises stress of the locked compression plate (LCP) first increases, then decreases, then increases again. The deformation from compression bending to tension twisting occurs simultaneously. At 30° of flexion, shear interfragmentary motion (SIM) was dominant and inhibited fracture healing; at more than 45° of flexion, the plate was twisted and deformed to the lateral side of the body, and the fracture site underwent greater misalignment and relative motion, with destructive effects on bone scabs and healing tissues. If muscle loading is not taken into account, the plate will undergo predominantly bending deformation and will overestimate the interfragmentary strain in the far and near cortex. ConclusionsKnee flexion causes the plate to deform from compression bending to extension and torsion, which has an important impact on the safety and healing process of the fracture, and this study provides a biomechanical basis to guide the clinician in the post-operative rehabilitation of femoral fractures in the clinical setting.