Abstract
Any treatment of fibers can influence properties of medium density fibreboard (MDF). In this research, the effects of hydrothermal treatment on physical and mechanical properties of MDF were studied. Industrial fibers were hydrothermally treated in a stainless steel reactor at 120, 150 and 180 °C for 0, 30 and 90 min as holding time. Test boards were made based on 0.7 g/cm3 target density, with 10 mm thickness under a pressure of 30 bar and at a temperature of 170 °C and a press time of 10 min. The boards were tested for internal bonding (IB), moduli of elasticity (MOE) and rupture (MOR), thickness swelling and water absorption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
