Abstract
Abstract This study investigated the effect of the type of gas used, nitrogen and helium, during cold spraying of titanium coatings. In all conditions, the propelling gases’ temperature and pressure were attuned to attain three similar particle velocities for each gas. Coatings were characterized by SEM and XPS. Deposition efficiency, coating microhardness, and porosity were evaluated for all conditions. Results show that for the same particle impact velocity, the deposition efficiency and coating density were mostly the function of the surface temperature, which in turn was influenced by spray parameters. It is shown that loosely-bonded particles at the surface can be detached by the passage of high pressure supersonic gas stream. In addition, a thick and fully dense cold sprayed titanium coating was achieved with optimized spray parameters with He and the corresponding average particle velocity was measured at 1173 m/s.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
