Abstract
ZrC films were grown on Si (100) substrates using magnetron sputtering where the growth temperature ( T s) was varied from 25 °C to 290 °C. Film/substrate practical adhesion of the ZrC films was determined by scratch testing while hardness, elastic modulus and fracture toughness were measured by nanoindentation. Structures and morphologies of the ZrC films were analyzed using scanning electron microscopy and X-ray diffraction. The results indicate that there exists an optimum growth temperature at T s=120 °C, at which the film exhibits the best adhesion. In addition, lower growth temperatures result in an increase in hardness and a decrease in modulus, while higher growth temperatures degrade fracture toughness. The film structure reveals a change from columnar to equiaxed nanocrystalline at T s=290 °C, which has a profound effect on some of the mechanical properties, such as hardness. The mechanism responsible for the nanocrystalline structure is discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.