Abstract
A technique based on the electrical resistance change of a network of carbon nanotubes within a polymer composite was implemented to assess damage caused by low-velocity impact in multiscale hierarchical composites. The influence of the electrode configuration in 100 mm x 100 mm x 1.7 mm plates is addressed. Three electrode configurations are evaluated, namely, a grid on the impacted surface, a grid on the opposite (non-impacted) surface, and through the thickness of the plate. Upon impact, matrix cracking, delamination, and fiber rupture cause disruption and redistribution of the electrical network of carbon nanotubes, whose electrical resistance changes can be correlated with such damage. It is found that the non-impacted surface exhibits a higher fractional change of electrical resistance and hence higher sensitivity to damage. The results obtained using the electrical technique showed a good correlation with damage detected by independent measurements by digital holographic interferometry and ultrasonic inspections.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Intelligent Material Systems and Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
