Abstract
The effects of damping on the bending and twisting modes of flax fibre-reinforced polypropylene composites are investigated. The laminate was manufactured by a vacuum bagging process; its dynamic behaviour was then found from the vibration measurements of a beam test specimen using an impulse hammer technique to frequencies of 1 kHz. The frequency response of a sample was measured, and the bending and twisting responses at resonance were used to estimate the natural frequency and loss factor. The single-degree-of-freedom circle-fit method and Newton’s divided differences formula were used to estimate the natural frequencies as well as the loss factors. The damping estimates were also investigated using a “carpet” plot. The results show significant variations in loss factors depending on the type of mode. The loss factor generally lies in the range of 1.7-2.2 % for the bending modes, while 4.8 % on average for the twisting modes. Numerical estimates of the response, and in particular the natural frequencies, were made using a Mechanical APDL (ANSYS parametric design language) finite element model, with the beam being discretised into a number of shell elements. The natural frequencies from the finite element analysis show reasonably good agreement (errors < 5 %) with the measured natural frequencies.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call