Abstract
The compacting and mixing processes involving hot mix asphalt during asphalt production can lead to air pollution as a result of a high volatile organic compound. An alternative solution that can reduce greenhouse gas emissions is by using warm-mix asphalt (WMA). A proper application of additives to the WMA can improve the asphalt mixture's strength, durability, and workability. In this study, a 60/70 grade asphalt binder was added with 5% of crumb rubber (CR) and three different WMA additives at the recommended dosages, namely Sasobit, Cecabase, and Rediset. The wet method was used to blend the additives with virgin asphalt binders. The mixing and compacting temperatures were set at 135°C and 125°C, respectively, to mix the asphalt mixture. Mechanical performance tests were performed to evaluate the impact of WAM additives with CR on asphalt mixture. Based on the results, all the modified asphalt mixtures showed a better mechanical performance than the virgin asphalt mixture in terms of indirect tensile strength, moisture resistance, permanent deformation, and stiffness. Among all the WMA additives, Sasobit with CR showed the most significant impact on the asphalt mixture's performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
