Abstract
Alumina insulators containing 95wt% Al/sub 2/O/sub 3/ were doped with Cr/sub 2/O/sub 3/ and MnO(MnCO/sub 3/). The properties of the doped samples were measured and compared with those of the original alumina insulators. Better surface performances of the samples doped with proper Cr/sub 2/O/sub 3/ and MnO were obtained while the bulk properties have hardly been changed. After doping the sample showed a lower SEE (secondary electron emission) coefficient, a lower surface resistivity and a higher surface flashover voltage in vacuum. Meanwhile, some points regarding the effects of manganese and chromium doping on the properties of alumina insulators were also briefly discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Dielectrics and Electrical Insulation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
