Abstract
Interlaminar delamination has been a persistent problem that restricts the ability of fiber reinforced laminated composites under applied load. The influence of polyethyleneimine-catechol (PEI-CCh) co-deposition modification on the mode I (GIC) and II interlaminar fracture toughness (GIIC) of plain glass fiber fabric reinforced epoxy composites (PGFRECs) were discussed using double cantilever beam (DCB) and end notch flexural (ENF) tests. It was found that interfacial properties of PET/epoxy and PET/cotton/epoxy interfaces were substantially improved after co-deposited modification, which laid a solid foundation for enhancing the resistance to interlaminar delamination. GIC and GIIC in platform of crack propagation greatly increased with the introduction of co-deposition layer. The fracture surfaces of delaminated failure specimens were observed by scanning electron microscope. The higher propagation fracture toughness for co-deposition modified PGFRECs is due to the anchoring effect of functional layer combining waste fabrics with epoxy matrix to provide favorable stress transfer channel prior to macroscopic crack formation. In regard to the delamination crack, new crack generation and bridge fiber failure mainly dominated the mode I crack extension process, while zigzag sections were particularly common for mode II fracture specimens.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
