Influence of boundary layer and pressure lag on unsteady aerodynamics of airfoil based on a simple semi‐empirical dynamic stall engineering model

Abstract

AbstractIn view of the fact that dynamic stall models in the wind energy industry such as ONERA model, Beddoes–Leishman model, and Snel model are mostly semi‐empirical models, and the determination of empirical time constants has a great influence on the model accuracy. To optimize the time constant in dynamic stall model and improve the prediction accuracy of unsteady aerodynamics, the influence of boundary layer and pressure lag on the unsteady performance of the S809 airfoil under 2D flow conditions is explored using a simple semi‐empirical dynamic stall engineering model. The proposed model consists of four first‐order differential equations accounting for attached flow and dynamic separation flow of trailing edge based on the Theodorsen theory. A validation is carried out by the wind tunnel experiment in the Key Laboratory of Wind and Solar Energy Utilization Technology of the Ministry of Education at Inner Mongolia University of Technology. The main conclusions are as follows. The time constants for lag in pressure and boundary layer both have a great influence on the unsteady lift coefficient. When the mean angle of attack is relatively small and the airflow is between the attached flow and the separated flow, appropriately reducing the time constant can make the prediction results closer to the experimental values. When the mean angle of attack is relatively large and the airflow is in condition of fully separated flow, the time constant value can be appropriately increased. The influence of pressure lag and boundary layer lag on the unsteady drag coefficient is not significant.