Abstract
A microfluidic pressure sensor with inductively coupled, wireless readout capability has been developed for integration into cerebrospinal fluid shunt valve implants. The sensor consists of a deformable PDMS film that is bonded over a microfluidic reservoir, forming a fluidic capacitor. Deflection of the capacitor membrane is detected remotely through a shift in the resonance frequency of a micro-fabricated LC circuit. Sensors were fabricated by a combination of conventional MEMS technologies and rapid soft lithography. A direct pattern transfer technique was used to pattern the deformable PDMS film with a metal coating for the capacitive readout. The mechanical response of the fluidic capacitor was characterized by measuring the deflection of the PDMS film using an extrinsic Fabry-Perot interferometer (EFPI), and wireless sensing was demonstrated by the shift in resonance frequency of the sensor via an inductively coupled antenna. The sensor transduces pressure into a change in resonant frequency with sensitivity > 3.4 ppm Pa−1 and responsivity 4.6 kHz Pa−1, over a dynamic range of 0 ~ 3 kPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have