Individualized Design Application of 3-Dimensional Printing Navigational Template for Pedicle Screw Installation: A Training Case Report.

Abstract

BACKGROUND The proper installation for pedicle screws by the traditional method of surgeons dependent on experience is not guaranteed, and educational solutions have progressed from chalkboards to electronic teaching platforms. We designed a case of 3-dimensional printing drill guide template as a surgical application, which can accurately navigate implantation of pedicle screws, and assessed its effect for simulative training. MATERIAL AND METHODS We randomly selected a set of computed tomography data for spondylolisthesis. A navigational template of pedicles and screws was designed by software Mimics and Pro-E, where trajectories of directions and angles guiding the nail way were manipulated for screwing based on anatomy, and its solid model was fabricated by a BT600 3D printer. The screws were integrated and installed to observe their stability. RESULTS The navigational model and custom spine implants were examined to be compatibly immobilized, because they are tolerant to radiation and stable against hydrolysis. The screw size and template were fit accurately to the vertebrae intraosseously, because the pilot holes were drilled and the trajectories were guided by cannulas with visible routes. During the surgical workflow, the patient reported appreciation and showed substantial compliance, while having few complications with this approach. Compared with fluoroscopy-assisted or free-hand techniques, the effect of simulative training during processing was excellent. CONCLUSIONS The surgical biomodel is practical for the procedural accuracy of surgical guides or as an educational drill. This fostering a style of "practice substituting for teaching" sets a paragon of keeping up with time and is worthy of recommendation.