Abstract
采用氩弧焊将镍基Inconel 690合金覆板以搭接的形式，焊接于新型乏燃料水池材料双相不锈钢S32101的表面，并对比自熔焊和填充焊两种工艺对接头显微组织及力学性能的影响. 结果表明，在合理的工艺条件下，两种工艺均可以获得成形良好的搭接接头，但填充焊可得到更大的搭接宽度，其抗拉强度最高可达538 MPa. 焊后检测发现，焊缝组织主要由胞状晶所组成，其间分布有颗粒状铁素体析出物. 两侧熔合线处呈现不同的结晶形貌，Inconel 690覆板侧具有明显的外延生长组织，而S32101侧则出现平面晶结构. 与自熔焊相比，填充焊热影响区中奥氏体溶解现象仅出现在熔合线附近极小的范围内.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
